WavePhore Networks IDR V1000 Guide de l'utilisateur Page 13

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 63
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 12
Installing the IDR V1000
2–4 MS-4900, Rev. A
Step 4:
Call the
Network
Operator
Once the E
b
/N
0
and AGC readings are at the expected levels and the E
b
/N
0
has been
maximized by adjusting the dish alignment, notify the network operator that the
receiver has been installed and is ready to be downloaded.
The operator may provide you additional instructions following the download.
NOTE: If the IDR V1000 was pre-configured at the factory, the necessary
settings may already be established and do not need to be downloaded.
Verify this with your site coordinator.
Step 5:
Maintain
the
Equipment
Satellite transmission can be adversely affected by bad weather. High winds can
knock a satellite dish out of alignment, and heavy snows, rain, or cloud cover can
severely diminish signal quality. You, or another designated individual at the site,
should attend to the following:
Check satellite dish alignment (by monitoring the E
b
/N
0
reading) following
heavy or gusty winds.
Remove snow from satellite dish using a stiff whisk broom.
Make sure snow doesn’t accumulate on the dish and that the LNB window is
clear.
Vue de la page 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 62 63

Commentaires sur ces manuels

Pas de commentaire